- Home
- Equipment
Refine by
Royal Eijkelkamp Environmental Equipment & Supplies
71 equipment items found
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The liner sampler set for hard soils with screw thread connection allows undisturbed soil samples to be taken in a liner. This is done by applying a stainless steel core sampler with sample tubes and cutting head. In hard soils the sampler tube can be driven into the soil using the shock-absorbing hammer with two nylon heads or the down-the-hole ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The Akkerman core sampler set is used for taking large undisturbed soil samples in sample tubes with a diameter of 70 x 67 millimetres and a length of 44 centimetres. Using this sampler, samples are taken in stainless steel sampling tubes in auger holes or casing tubes (above as well as under the groundwater level) up to a maximum depth of 50 ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The Van der Horst core sampler set is used for manually sampling soil cores up to a depth of 7 metres. This set is suitable for many applications, for example above and below groundwater ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The stainless steel peat sampler is in fact a kind of gouge auger. You can easily push the peat sampler into the ground by hand. The sample containing part is a half cylinder. The peat sampler distinguishes itself from the standard gouge auger as its cone is ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The free-fall corer sampler is designed to sample submerged soils/sediments at greater depths, from the bottoms of rivers, lakes, ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Seismic CPT is performed by pausing at regular intervals throughout the CPT and generating seismic waveforms at the surface. These waveforms are detected by a seismic module behind the CPT cone. The seismic module houses a tri-axial accelerometer that can be used with either a 10 cm2 or a 15 cm2 cone to perform seismic cone penetration ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The bed-load transportmeter, type Arnhem is a sampler, used to measure bed-load of coarse sand and fine gravel in rivers and in other ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Auger set for hand operated augering up to 5 metres depth in heterogeneous soils. This is a standard set for augering, with unpainted augers for environmental research. The augers have a bayonet ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The ergonomic upper part has been developed for drilling in an ergonomically sound manner. The ergonomic upper part is available in several ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Two-piece gouge auger set with conical screw thread for hard soils. This set is suitable for sampling in hard soils to a depth of 5 metres. The auger set is easy to operate by one man thanks to the stiff and sturdy conical screw ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
This auger set has an ergonomic ratchet handle for safer use. It is suitable for hand-operated augering up to 5 metres depth in heterogeneous soils. The augers have a bayonet ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The Pürckhauer gouge auger set is used for one piece soil sampling or profiling in hard soils to 1 metre deep. This is a gouge auger set made according to Dr. Pürckhauer's ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The one-piece gouge auger set for hard soils is used for sampling to a depth of 1 metre, through tougher soil layers. The consists of a gouge auger of a heavier design, an impact absorbing hammer, accessories and a strong carrying ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The one-piece gouge auger set for soft soils is used for sampling to a depth of 1 metre. The set contains two gouge augers with different lengths but the same diameter, and produces undisturbed samples which makes it suitable for various types of profile ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
Bailer auger set for hand-operated augerings, as well as the installation of sampling and monitoring wells, up to 7 metres depth in heterogeneous ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The casing tube clamp consists of a hinged joint that fits around the casing tube, two handles and a rotating lever. The handle clamps the casing tube with a pre-set force. The casing tube clamp is used to push or turn the casing tube in the ground, and to pull it out ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
This casing shoe with a diameter of 90 mm is suitable for drill pipes with the same diameter. The casing shoe is toothed and has a length of 10 cm. The casing shoe is used to make it easier to penetrate the soil. Finally, the casing shoe has a coarse, left-hand ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The threaded cap is made of high-quality steel. The product is suitable for drill pipes with a diameter of 90 mm and has a left-hand, coarse, round female ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
The protective cap for drill pipes with a diameter of 90 mm is available in a variant with internal thread and with external thread. The protective caps are made of sturdy ...
Manufactured by:Royal Eijkelkamp based inGiesbeek, NETHERLANDS
This liquid layer sampler is especially suitable for sampling and accurately visualising layers in deeper containers, basins, monitoring wells with a diameter of more than 38 millimetres. This is possible thanks to the transparent sampler made of PTFE and stainless ...